1995 lance 945 truck camper
Looking for info on how to replace rear entry door hinge..door sticking on threshold.
Forum Discussion
Thank you ...I will try that tilt a bit....how long should I leave it in that position before easing off the jack
I’m spitballing here and it may not even work.
with my recommendation, be careful and don’t go overboard. You could stress the Jack mount or Jack on that side potentially.
That said, I don’t think you could do break anything doing it with the camper off the truck as the rear is much lighter than the front and most all TCs will tripod on one rear leg pretty quickly.
If you keep the other side strapped to the truck, and just keep cranking is when you could break something.
Again not a scientific procedure but I’d consider raising it up a bit more than the 1.5” a few times and see if it tweaks it at all.
But the better method may be to see if you can shim it up in the truck bed, start at 3/4” maybe and after driving around like that it may help. Or likely to spring back.
It’s old and it’s not a very rigid frame (wood stapled together in the corners) so go easy and if your method works and a little shim in there bed works I’d roll with that.
