Avion truck campers - Hundreds of photos
Without going into too much painful detail, we had a mishap several week-ends ago. While working with sand bag crews on the Mississippi River, the truck and camper fell into the flood waters as a road...
Forum Discussion
rastaman33609 wrote:ticki2 wrote:
One other thought on the 3/4 and 1/4 ply . The bunk floor is more than 4 ft. wide so it will need a splice unless you special order 5 ft wide plywood , expensive . That means you will have a 1/4" gusset by offsetting the seams . I would sooner go 1/2" and 1/2".
not sure I follow...are you saying to use 1/2'ply?
What I'm saying is if you decide to go sold wood as Cayo suggests , 3/4" + 1/4" =1" , I would use 1/2" + 1/2" = 1" to make the splice stronger . BTW , I'm pretty sure the original was 3/8" ply + 1" styrofoam + 3/8" ply , same as the floor , which would make total of 1-1/4" thick . Perhaps someone who has taken one out can confirm .
edit . I took the 1/4 + 3/4 from your post about Cayo . I see now that Cajun in his post stated Cayo said 1/2" + 3/4" , which would be 1-1/4" as stated above . That is where the confusion is coming from .
