Avion truck campers - Hundreds of photos
Without going into too much painful detail, we had a mishap several week-ends ago. While working with sand bag crews on the Mississippi River, the truck and camper fell into the flood waters as a road...
Forum Discussion
Sounds like you are making good progress . As long as the total thickness of the bunk floor is the same it should work fine . Since I didn't have to replace mine I don't know how the bunk floor was attached to the frame . I suspect it was screwed up from the bottom into the aluminum perimeter U channel , or perhaps down through the channel into the wood . I am not clear on the extra wood you want to add between the ribs . All my windows are framed with aluminum U channel so again not sure why you are adding 2"x2" alum angle under the front window . Some pictures would help clarify .
