Avion truck campers - Hundreds of photos
Without going into too much painful detail, we had a mishap several week-ends ago. While working with sand bag crews on the Mississippi River, the truck and camper fell into the flood waters as a road...
Forum Discussion
Silver, regarding fastening parts on the Avion without rivets, I'm seriously considering using 3M VHB tape. Ck out the link below. It comes in different thicknesses, widths and properties. I think it would be an excellent means of attaching any skin panel, inside or outside the camper. The only question I have is placement - adjusting the piece into position before the adhesive gets too attached. I plan to call 3M Tech Service when I get to that point. It could be perfect for attaching the outer skin over the storage boxes I'm designing and building now. It would be great for inner skin and petals, assuming the fitting process can be mastered. Less rivets is a good goal I think. Anyway, ck it out:
http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Brands/3M-VHB-Tape/
Onward!
http://solutions.3m.com/wps/portal/3M/en_US/Adhesives/Tapes/Brands/3M-VHB-Tape/
Onward!
