Avion truck campers - Hundreds of photos
Without going into too much painful detail, we had a mishap several week-ends ago. While working with sand bag crews on the Mississippi River, the truck and camper fell into the flood waters as a road...
Forum Discussion
It seems that everyone must be out enjoying their Avion, Lucky you.
I think I have just about finished my interior. Except for the curtains, (not my department). I have completed all the electrical and plumbing and they have passed the 'systems test' with flying colors.
This is the electric control center
The Batteries will be in the bed of the Truck
On the exterior all the seams have been sealed with parabond. I have replaced the rubber seals on the bottom of the all the windows. All the running lights are working except the rear upper 3 lights. for some reason the 'sockets' need to be 'wiggeled' to get them to work, its is definitely the sockets, so new lights will be in needed.
Next will be installing a new vent cover on the roof after a fresh coat of some kind of 'roof coating' is applied. I have not been able to locate any grey /silver kool seal, thinking of using some other brand, Any suggestions?
Then that baby will be mounted on the truck and some 'grey water storage will be designed....
So after another Hot humid day of projects, I am sitting in the shade under a large Oak tree, sipping a rum and coke with visions of Mully point in my head.....
Yeh Mon
..
I think I have just about finished my interior. Except for the curtains, (not my department). I have completed all the electrical and plumbing and they have passed the 'systems test' with flying colors.
This is the electric control center
The Batteries will be in the bed of the Truck
On the exterior all the seams have been sealed with parabond. I have replaced the rubber seals on the bottom of the all the windows. All the running lights are working except the rear upper 3 lights. for some reason the 'sockets' need to be 'wiggeled' to get them to work, its is definitely the sockets, so new lights will be in needed.
Next will be installing a new vent cover on the roof after a fresh coat of some kind of 'roof coating' is applied. I have not been able to locate any grey /silver kool seal, thinking of using some other brand, Any suggestions?
Then that baby will be mounted on the truck and some 'grey water storage will be designed....
So after another Hot humid day of projects, I am sitting in the shade under a large Oak tree, sipping a rum and coke with visions of Mully point in my head.....
Yeh Mon
..
