Avion truck campers - Hundreds of photos
Without going into too much painful detail, we had a mishap several week-ends ago. While working with sand bag crews on the Mississippi River, the truck and camper fell into the flood waters as a road...
Forum Discussion
Hi All,
thanks for the information.
I just got a line on a few aluminum honeycomb panels, 3/4" thick for a great price, $25 dollars each for 4'x5' sheets. So a significant cost and weight savings over plywood. Anyone have any experience using these?
Seems they can be riveted and epoxied and cut with a jig saw or router.
I know the thermal conductivity would be a downside, but no rot could more than make up for that.
any thoughts?
thanks for the information.
I just got a line on a few aluminum honeycomb panels, 3/4" thick for a great price, $25 dollars each for 4'x5' sheets. So a significant cost and weight savings over plywood. Anyone have any experience using these?
Seems they can be riveted and epoxied and cut with a jig saw or router.
I know the thermal conductivity would be a downside, but no rot could more than make up for that.
any thoughts?
