Forum Discussion
ticki2
Sep 25, 2016Explorer
My C-11 is similar .
Bottom of floor to top of furnace chimney is 86" ( no AC )
Note: C-10 has different furnace .
Jack support angles are 2-1/4" less than width of 92" on each side .
Jack heads are 9" from mount plate to square crank key .
Total width with jacks is 92 -5 +18 = 105". ( As Silver pointed out the bottom feet of jacks will stick out farther .
Bustle hangs down from bottom of floor 8"
3" drain hangs down an additional 3-1/2"
Bottom of floor to top of furnace chimney is 86" ( no AC )
Note: C-10 has different furnace .
Jack support angles are 2-1/4" less than width of 92" on each side .
Jack heads are 9" from mount plate to square crank key .
Total width with jacks is 92 -5 +18 = 105". ( As Silver pointed out the bottom feet of jacks will stick out farther .
Bustle hangs down from bottom of floor 8"
3" drain hangs down an additional 3-1/2"
About Truck Camper Group
264 PostsLatest Activity: Dec 31, 2025