Avion truck campers - Hundreds of photos
Without going into too much painful detail, we had a mishap several week-ends ago. While working with sand bag crews on the Mississippi River, the truck and camper fell into the flood waters as a road...
Forum Discussion
c11motorhome: I think you will find the strength of 2 x 3/4 ply is by far stronger than a foam core. Simple engineering.
Dick: good info on the epoxy. It is some serious toxic stuff to apply so I am TBD on it.
Since it is our national turkey weekend, getting an extra set of hands is a challenge when needed.
Got the back on attached with clecos. Not sure how one could survive a job like this without clecos! This whole project is a bit of a gamble as I did not know how it would reattach. Since the floor is not level or solid, it took a bit of effort to move the edges to the correct position before drilling. A big sigh of relief when it was finally lined up correctly. Riveting starts tomorrow.
Introducing the "C9 Ultra".....
Dick: good info on the epoxy. It is some serious toxic stuff to apply so I am TBD on it.
Since it is our national turkey weekend, getting an extra set of hands is a challenge when needed.
Got the back on attached with clecos. Not sure how one could survive a job like this without clecos! This whole project is a bit of a gamble as I did not know how it would reattach. Since the floor is not level or solid, it took a bit of effort to move the edges to the correct position before drilling. A big sigh of relief when it was finally lined up correctly. Riveting starts tomorrow.
Introducing the "C9 Ultra".....
