Avion truck campers - Hundreds of photos
Without going into too much painful detail, we had a mishap several week-ends ago. While working with sand bag crews on the Mississippi River, the truck and camper fell into the flood waters as a road...
Forum Discussion
Slow progress the past few days. With cooler temps, the poly wood sealant took a lot longer to dry between coats. The wing pieces are ready to go, the front part of the box needs a couple more coats. The 1/4 round was damaged from the jack mounts having only rotted wood for support. On the left side, I just moved the whole thing forward about 12" as it was too long anyways and would have cut the rear off. One of the more straight forward bits to fix.
For some reason I assumed the bottom channel was a simple 'u' and then a separate piece for the 1/4 round. Turns out it is all one extruded piece.
For some reason I assumed the bottom channel was a simple 'u' and then a separate piece for the 1/4 round. Turns out it is all one extruded piece.
