Avion truck campers - Hundreds of photos
Without going into too much painful detail, we had a mishap several week-ends ago. While working with sand bag crews on the Mississippi River, the truck and camper fell into the flood waters as a road...
Forum Discussion
They are made with 4" structural channel with 1/4" plates . They add 8" of height . My flatbed is 42" high unloaded . You could go wider and shorter depending on your measurements . That said , the wider you go the more leverage you put on the angle brackets under the wing . Mine are attached with elevator bolts as original. If doing it again I would use carriage bolts with at least 1/4" backer plates above the wing .
