Avion truck campers - Hundreds of photos
Without going into too much painful detail, we had a mishap several week-ends ago. While working with sand bag crews on the Mississippi River, the truck and camper fell into the flood waters as a road...
Forum Discussion
Rastaman, The L brackets sound like a good idea. I'd (multi-) bolt (or multi - lag bolt) them solidly to the sides of the platform (which is hopefully 2 X thickness minimum around the perimeter, x whatever height you need), and bolt the tops at the front - to the camper it self (also I feel a minimum) in case of starting out from a stop, going up a steep hill, especially if your have a manual transmission, "pulling gears" in the rear end, or a powerful engine, to eliminate any chances of the camper sliding off of the rear of the trailer. It could be your other tie downs can do this and those steps may not be needed? It sounds as if you have a solid plan so far. Good luck!
