Avion truck campers - Hundreds of photos
Without going into too much painful detail, we had a mishap several week-ends ago. While working with sand bag crews on the Mississippi River, the truck and camper fell into the flood waters as a road...
Forum Discussion
garryk6 wrote:
Well it was good I didn’t do what I said above since in order to install the Stablelift the camper has to be on the truck... but. The Stablelift is here so now trying to figure the best way to load it in the truck.
Garryk6...good luck with that, it will be a challenge.
I now have my C10 mounted on a 12' car trailer, Once you get by how wrong it looks to have a TC on a trailer,it grows on you. It actually may work out pretty good. Function over Form. The tie downs will be perfect. Tongue weight is right and adjustable by sliding the TC back or forth, and plenty of storage area. Not to mention how easy it is to get in and out, being that low.
I did end up raising the camper 8 1/2" using a combination of 2x6 screwed to the underside, and a 4"x4" frame with 3/4" ply platform.I also used a 4' x8' x 1/4' sheet of rubber to provide traction on the aluminium trailer floor.
Now I am just trying to figure out how to place and attach the grey water tank beneath the trailer.
I will post pictures soon, If you all promise not to laugh.....
