Avion truck campers - Hundreds of photos
Without going into too much painful detail, we had a mishap several week-ends ago. While working with sand bag crews on the Mississippi River, the truck and camper fell into the flood waters as a road...
Forum Discussion
flyte63 wrote:
Hi ticki, I have not found a place where the outer skin or aluminum frame is specifically bonded to the 12v ground. However on my ‘65 the Ground Wire of the pigtail coming from the truck is wired to the 12v house White negative line inside the front wall below the old screw-in fuse box. While I was in there I added a new ground stud (bolt) to the aluminum frame next to where the pigtail comes in so that I have someplace good to ground to. I also added switch plate sized access panel In that area so I don’t have to pull the inside skin off to get at that area next time.
That's probably a smart idea . Since I couldn't find the original I added one . I was just curious where the
original was . I didn't have to take my Avion completely apart because it was in good condition , but I know others have had theirs stripped .
