So what did you do to your Truck Camper today?
I saw these threads in some of the other Open Roads RV Forums, but didn't see one for TCs. I'll start... I installed Interior LED puck lights and a 12v power outlet.
Forum Discussion
Also today I added some grip tape to my camper steps. My DW has slipped twice now getting out of the camper. That stuff Lance puts on is slippery! Junk I'd say.
I cut to fit as the photos show. This stuff is VERY grippy. DW loves it!
BEFORE;
plastic ribbed stuff that is slippery when wet OR dry. Very dangerous stuff;
AFTER;
Removed the plastic rib off the step and cut it off the bumper, then cleaned the painted surface, peel-n-stick the grip tape.
CLOSE UP;
I used a box cutter to trim the ribbed plastic and the pre-cut grip tape as a template to mark the area to be cut.
I cut to fit as the photos show. This stuff is VERY grippy. DW loves it!
BEFORE;
plastic ribbed stuff that is slippery when wet OR dry. Very dangerous stuff;
AFTER;
Removed the plastic rib off the step and cut it off the bumper, then cleaned the painted surface, peel-n-stick the grip tape.
CLOSE UP;
I used a box cutter to trim the ribbed plastic and the pre-cut grip tape as a template to mark the area to be cut.
