Forum Discussion
3,114 Replies
- recyclerExplorerput up some more foam board insulation
- Camper_Jeff___KNavigatorThe Trimetric is on the wish list. More important items first like a second solar panel.
- dakonthemountaiExplorer
Mello Mike wrote:
Camper_Jeff_&_Kelli wrote:
I have a replacement 45 AMP BoonDocker power supply coming Friday so I needed to get my 4 AWG wiring upgrade finished. Got the battery compartment done and made all the connections to the new power distribution block. Installed a 100 AMP breaker on the main battery power lead. Routed 4 AWG wire to the new Power supply location. Installed contingency wiring for a power inverter. Eliminated about 10 feet of length of wires from what the old arrangement was and is now 4 AWG. There are a few more associated projects to complete before I have the TC the way I want it.
Sounds great. The 4-AWG will serve you well.
I'm right behind ya! I'm ordering mine next week, along with the Trimetric meter... :)
Dak - Mello_MikeExplorer
Camper_Jeff_&_Kelli wrote:
I have a replacement 45 AMP BoonDocker power supply coming Friday so I needed to get my 4 AWG wiring upgrade finished. Got the battery compartment done and made all the connections to the new power distribution block. Installed a 100 AMP breaker on the main battery power lead. Routed 4 AWG wire to the new Power supply location. Installed contingency wiring for a power inverter. Eliminated about 10 feet of length of wires from what the old arrangement was and is now 4 AWG. There are a few more associated projects to complete before I have the TC the way I want it.
Sounds great. The 4-AWG will serve you well. - Camper_Jeff___KNavigatorI have a replacement 45 AMP BoonDocker power supply coming Friday so I needed to get my 4 AWG wiring upgrade finished. Got the battery compartment done and made all the connections to the new power distribution block. Installed a 100 AMP breaker on the main battery power lead. Routed 4 AWG wire to the new Power supply location. Installed contingency wiring for a power inverter. Eliminated about 10 feet of length of wires from what the old arrangement was and is now 4 AWG. There are a few more associated projects to complete before I have the TC the way I want it.
- James_ExplorerAdded LEDs throughout inside and out. VERY nice warm light.
- JoeChiOhkiExplorer IIFinished getting the Christmas lights taken down ;).
- Buzzcut1Nomad IIgot around to removing the frost and ice from the freezer in the TC. there was 1/2 inch of frost over 1/8" of ice on the back wall and what looked to be the remnants of burst otter pops on the bottom of the freezer. hot water on rags, a plastic spatula and 20 minutes of elbow grease and its all nice and clean.
All thats left for heading out in the AM is to load the food and top off the fresh water tank. - mountainkowboyExplorerTook it off the truck today, time to start some interior upgrades.
- clinthiaExplorerI ordered a Jack antenna head.
Clint
About Truck Camper Group
298 PostsLatest Activity: Jun 29, 2026