So what did you do to your Truck Camper today?

JoeChiOhki wrote:
Forked out $672.12 for a new custom exhaust to replace the worn out factory exhaust on the truck.

Once I get it back, it'll be out onto the driveway to replace the damaged bellows on the driver's side, then back north to finish trip preparations.

Washed the camper wednesday, next it'll be time to dismount the driver's side rear jack and relube it so that it doesn't bind up when lifting, then load the camper, after washing the truck and finishing the fender repairs.

Touch up any damaged paint, attach the new rear generator basket and install the generator, load the bikes,.... damn I have a long laundry list of stuff to get done by monday! :p

Joe you better tighten up " time draweth nigh" :B

Have a small to do list for october trip but with temps reaching 107 degrees in Big D...Dallas, tx. Absolutely nothing!!!! Monday having ride rite 5000s plumbed separatly at 4wheelparts..

Forked out $672.12 for a new custom exhaust to replace the worn out factory exhaust on the truck.

Once I get it back, it'll be out onto the driveway to replace the damaged bellows on the driver's side, then back north to finish trip preparations.

Washed the camper wednesday, next it'll be time to dismount the driver's side rear jack and relube it so that it doesn't bind up when lifting, then load the camper, after washing the truck and finishing the fender repairs.

Touch up any damaged paint, attach the new rear generator basket and install the generator, load the bikes,.... damn I have a long laundry list of stuff to get done by monday! :p

Installed an external 12v fan to help my refrigerator cool in the summer.

I camped for 4 days in the desert at Mojave Forks Regional Park.... AND organized the photos on my computer!! So I will be posting photos soon! FINALLY! ;-)

Dak

Sealed the seams on the roof with another coat tomorrow.

Up dated some chaulking and DREAMED!!!!!

continue to tweek my boondocking model in preparation of our 6 week trek to NF on thru Canada to ME,NH,and VT.getting pretty ancy to leave as i pack,plan,and research a little each day.

Just got done washing off 2887 miles of bugs and grime off of the S&S!

Installed my new all aluminum radiator for the engine, the new all aluminum Long Tru-Cool Max 45,000 BTU transmission cooler, and my Derale deep transmission pan and pickup extension, along with the temp sensor for the new temp gauge (To be installed).

Still need to get some more transmission fluid, 2.5 gallons in and we're still not up to the cold mark yet on the dip stick, and I need to take the truck over to the exhaust shop to have the exhaust redone, hacked a section of the driver's side down pipe out to accommodate the new transmission pan :).

Once the exhaust is done, I've just gotta swap the driver's side air bellows on the suspension and fix up the fender cosmetically and the truck side of the equation will be ready to roll :).

I ordered my Torqlift Glo Steps.