Truck Camper Dually Jack Stabilizer Brace
VIDEO. https://youtu.be/jVoX50eUdSc I recently installed dually swing out jack brackets on the truck camper because we have upgraded from a 2000 F-250 with a 5.4 liter, to a 2006 F-550 6.0...
Forum Discussion
That's one of those "why have we not seen that before" inventions! Great idea Jeff!
Thank you, glad it meets your experienced truck camper approval. A simple project with big benefit.
There are several different commercially available sway braces for TC jacks.
When we used to TC and stay in it with the camper up in the air sometimes, I’d just use a handful of ratchet straps. Less permanent solution but same outcome.The ratchet strap would only work in one direction if the jack leg was moving away, it would tighten and stretch. If the motion of the jack leg is toward the camper, the strap would do nothing, it would gain slack and the leg could lean unrestricted. That's why this setup is so good. It is a solid connection and doesn't allow motion away or toward. It holds the jack solidly in position. I do not need to worry about an excessive lean and possible collapse now.
^Yup, can’t push a rope.
but you can pull on opposing ropes (x brace) for the same outcome as a rigid diagonal brace.
