Truck Camper Dually Jack Stabilizer Brace
VIDEO. https://youtu.be/jVoX50eUdSc I recently installed dually swing out jack brackets on the truck camper because we have upgraded from a 2000 F-250 with a 5.4 liter, to a 2006 F-550 6.0...
Forum Discussion
???? Strange question from an experienced TC owner.
I have never seen such witchcraft before, only time I have seen stabilizers is for units being used off the truck, and there's very few built to be used that way. those on my camper would drive against the truck box so I was curious when he was using them as they would be unusable for unloading and loading on mine, and I have hydraulic jacks so they aren't usable off the camper either.
At the camper, they attach higher than the fender. Clamped to the outer non moving jack tube, they are wider than the fender. The down and autward angle of the bracing bar also clears the dually fenders. There is no interference by a comfortable margin. I will use them whenever raising, lowering, or sitting on the ground. Only time to disconnect them is when on the truck and the jacks are folded in.
Oh, I think I am looking at them from the wrong angle due to the close up pictures, for some reason I thought they were attached to the front wall of the camper instead of the sides
