Atlee
Sep 09, 2020Explorer II
First quickie mods to my new to me Redhawk 22J
The first one is automatic with any new to me RV. I change out the analog thermostat with a digital one.
![](https://i.imgur.com/PTqN6hVl.jpg)
![](https://i.imgur.com/j4KIwLrl.jpg)
![](https://i.imgur.com/349tn3Jl.jpg)
![](https://i.imgur.com/MYK5JBFl.jpg)
![](https://i.imgur.com/gp5KFanl.jpg)
The 2nd one is adding a ladder to my overhead bunk. In the 2018 model, Jayco didn't supply a ladder. I had to cut off 9" at the bottom to make it fit.
![](https://i.imgur.com/VNkOuEbl.jpg)
![](https://i.imgur.com/SGVjV54l.jpg)
The 3rd one is not so much a mod, but covering the aluminum angle used for bracing on the dinette. That metal is nicking the seat and back cushions. We're covering them with brown duct tape.
![](https://i.imgur.com/PDNQN9Kl.jpg)
![](https://i.imgur.com/GSZSjNSl.jpg)
![](https://i.imgur.com/1MsQia5l.jpg)
![](https://i.imgur.com/PTqN6hVl.jpg)
![](https://i.imgur.com/j4KIwLrl.jpg)
![](https://i.imgur.com/349tn3Jl.jpg)
![](https://i.imgur.com/MYK5JBFl.jpg)
![](https://i.imgur.com/gp5KFanl.jpg)
The 2nd one is adding a ladder to my overhead bunk. In the 2018 model, Jayco didn't supply a ladder. I had to cut off 9" at the bottom to make it fit.
![](https://i.imgur.com/VNkOuEbl.jpg)
![](https://i.imgur.com/SGVjV54l.jpg)
The 3rd one is not so much a mod, but covering the aluminum angle used for bracing on the dinette. That metal is nicking the seat and back cushions. We're covering them with brown duct tape.
![](https://i.imgur.com/PDNQN9Kl.jpg)
![](https://i.imgur.com/GSZSjNSl.jpg)
![](https://i.imgur.com/1MsQia5l.jpg)