New 50 AMP plug install-tin leads?
My rig has a hardwired 50 amp cord that is way too long. So I am shortening it by cutting it and adding a new CAMCO plug like this: This one The instructions say not to solder the ends but it se...
Forum Discussion
SoundGuy wrote:Chris Bryant wrote:
I don't like tinning in this case- if the connection heats at all, the solder can soften, making the connection worse.
The OP isn't talking about tinning all the exposed copper, just the ends, which is what I've always done to prevent individual strands from separating from the bunch.
That's what I am talking about- not a good idea. I tin low voltage/low current leads, but not power.
FWIW, I really like the Progressive Indutries replacements- this one on Amazon is miss labeled,but that's the one
