New 50 AMP plug install-tin leads?
My rig has a hardwired 50 amp cord that is way too long. So I am shortening it by cutting it and adding a new CAMCO plug like this: This one The instructions say not to solder the ends but it se...
Forum Discussion
"Tinning the wire ends which are not under the screw is perfectly fine and avoids having errant strands sticking out and possibly contacting an adjacent contact. I always tin the wire ends."
Have you ever replaced a cord end? If so you would know there should not be wires "sticking out". There would not be any loose strands that is why you twist them before placing in position and tightening.
Have you ever replaced a cord end? If so you would know there should not be wires "sticking out". There would not be any loose strands that is why you twist them before placing in position and tightening.
