5th wheel hitch
Planning to buy a Artic fox 28-5 with a gross weight of 15700 lbs when fully loaded. I have a good deal on a B&W Patriot 16000 lbs of tow weight is this to close to max weight of RV or go with a 18000 lbs tow hitch .
Forum Discussion
Me Again wrote:
Cummins12V98 wrote:
4x4ord wrote:
^^^ I realize my story is not an apples to apples example. The point I was hoping to get across from it was that if a well built hitch is used at double its rated capacity and something goes wrong the hitch is not likely going to fail. I would be afraid to get on an elevator if I thought I couldn't trust the rated capacity of hitch.
Just twisting your bones! Everything has a "FACTOR" built in and B&W's is VERY high.
My MORryde IS axles are rated 8k, they actually inspected mine that are at nearly 9k and they said they looked good and were within their spec!
You still need Lucy to shed some rocks!
FAT chance!!!- I love my 18K Patriot which works very well with our signature 5ver. Very easy to adjust the height if needed.
Cummins12V98 wrote:
4x4ord wrote:
^^^ I realize my story is not an apples to apples example. The point I was hoping to get across from it was that if a well built hitch is used at double its rated capacity and something goes wrong the hitch is not likely going to fail. I would be afraid to get on an elevator if I thought I couldn't trust the rated capacity of hitch.
Just twisting your bones! Everything has a "FACTOR" built in and B&W's is VERY high.
My MORryde IS axles are rated 8k, they actually inspected mine that are at nearly 9k and they said they looked good and were within their spec!
You still need Lucy to shed some rocks!4x4ord wrote:
^^^ I realize my story is not an apples to apples example. The point I was hoping to get across from it was that if a well built hitch is used at double its rated capacity and something goes wrong the hitch is not likely going to fail. I would be afraid to get on an elevator if I thought I couldn't trust the rated capacity of hitch.
Just twisting your bones! Everything has a "FACTOR" built in and B&W's is VERY high.
My MORryde IS axles are rated 8k, they actually inspected mine that are at nearly 9k and they said they looked good and were within their spec!- ^^^ I realize my story is not an apples to apples example. The point I was hoping to get across from it was that if a well built hitch is used at double its rated capacity and something goes wrong the hitch is not likely going to fail. I would be afraid to get on an elevator if I thought I couldn't trust the rated capacity of hitch.
- Great apples to apples example. ;)
- I used a hitch rated for towing a maximum weight of 5000 lbs to tow a 40,000 lb implement. All was well until I got going a little too fast and hit a hole in the road. This caused the castor wheels on the implement to swing 180 degrees back and forth which in turn caused the implant to slam violently back and forth on my 7/8 inch hitch pin which was kind of lost in the 2 1/2 inch diameter hole on the implement's hitch. Anyway, by the time I got stopped my 8000 lb hitch had long slotted holes where the 5/8 pin coupled the hitch into the hitch receiver. I'm sure if I'd used a hitch rated for 20,000 lbs I would have been fine.:)
sayoung wrote:
I now use the 18K Patriot ( after 2bad pyramids ) on our Jayco that's 10500 dry . . It's worth the price difference for the welded frame, imho. I started with a Reese 16K that was fine just noisey
It's a shame we can't all just start out with the BEST right from the start!!!- I now use the 18K Patriot ( after 2bad pyramids ) on our Jayco that's 10500 dry . . It's worth the price difference for the welded frame, imho. I started with a Reese 16K that was fine just noisey
- The B&W hitch line is WAYYY under rated. There is a thing called engineering to a higher number as they do.
Buy either one. I ran 19k on my 18k Companion for several years.
