B&W Companion RVK3500 Set Up
I need some advice for setup on a B&W Companion RVK3500. Truck: 2010 GMC 3500 Crew Cab, DRW, 8' bed 5th Wheel: 2012 Avalanche, 38', 14K lbs GVWR Mainly I need suggestions for mounting locat...
Forum Discussion
Go it set up last night. We ended up orienting the 2X2 stinger so it was centered in the middle of the hitch base. We put the head mounting arms in the forward most position, bottom set of holes, with the vertical side facing forward. This put the center of the arms approximately 3" forward of the center line of the axle.
My buddy is picking up his 5er Friday and the dealer told him to not torque the arm bolts. They want them snugged up to check pin box height and adjust if needed, then they'll torque them down. We took measurements off my 5er and if his is close to the height of mine it should be perfect where we have it now. I guess we'll know for certain this weekend.
KJ
My buddy is picking up his 5er Friday and the dealer told him to not torque the arm bolts. They want them snugged up to check pin box height and adjust if needed, then they'll torque them down. We took measurements off my 5er and if his is close to the height of mine it should be perfect where we have it now. I guess we'll know for certain this weekend.
KJ
