Cameo slide out
Cameo slide out issue Hi All I have a 2008 Cameo F35Sb3 and today one of my slide-outs would not function properly when trying to bring it in. It would move 6 inches then stop I would wait 10 sec ...
Forum Discussion
SDcampowneroperator wrote:
Peter,
you do not write if its a just stop and pause ( which indicates an electical issue ) or a mechanical issue
Oir 09 Cameo started the pause issue on doorside slide which indicated motor overload. By extending it an inch then bringing it back in we could eventually close the slide. Eventually the rear gear in the zipper panel mentioned in previous post stripped.
Age and increased friction was the cause as well as poor gear alignment.
Look at these previous threads I made for a cure. Pm me for more
rbw slideout gears ( orphan ) gears again
rbw sideout crown gears stripping
Max
Hi SD
As you are likely aware the slide out lifts up a bit before coming in.It feels like a power issue as it is hard to get going and does seem strong enough. it starts to move then it stops even with finger on button I can press button nothing happens, I wait about 5-10 seconds press the button againand it slowly moves again. Once it is in about 12 inches or so it comes in rest of the way ok.
its almost as if I don't have enough power to get it up and moving.
