Forum Discussion

fj12ryder's avatar
fj12ryder
Explorer III
May 27, 2021

Electrical problem with front stabilizers. Update.

Okay, I need some suggestions, hints, or outright solutions. I have a 2010 Keystone Fuzion 383, a 40' toyhauler. It has been in storage for the last few months. The battery has been on a Battery Te...
tommyznr's avatar
tommyznr
Explorer
May 28, 2021
You say you have 12V at the switch when it is open and 0V when it is closed. So closing the switch is shorting the circuit to ground. Since you can run a wire direct to the motor bypassing the switch without shorting to ground, I suspect that your switch is shorting to ground.

Can you remove the switch from it's mounting position and let it hang if free air? You could then operate the switch and see what happens.

About Fifth Wheel Group

19,008 PostsLatest Activity: Mar 07, 2025