Fifth wheel dolly?

Flapper, find the house you want, that has room for your FW. If it has a ready-made hard pad, great. If not, pour one. Lots of options out there, from self-contained tugs, plug-in tugs or a simple dolly that you can maneuver with a lawn/small tractor, bobcat, quad or side-by-side.

Lyle

.

"Yard Dolly or Trailer Mover?" - 2013

See post & pic by "pbar34" (note the surface) and opinion by "57 Panhead".


.

Dtank wrote:

bpounds wrote:

Dtank wrote:

BTW - the idea about adding a ball under the 5th is rediculous..:R

.

;)

Might be that you lack imagination. That is a better point to lift from, than a pin 4' off the ground.

A trailer ball would not be the way to do it however.

The "lifting" is *not* the problem...:R

Moving it around when lifted *IS* the problem.

*If* you have a paved surface (not grass), that's level and flat
(no curbs to "ramp up") there are several options (like Power Caster) that work well - all of which use the pin.

Soooooo if somebody knows of one, I'll join the OP and put it to use.


.

"bpounds" - the pic is great..:C

However, it appears to be on a: - paved, level surface.

With front stabilizers almost touching the surface - why?..:@

Will the "mover" pictured move the trailer over grass?..:@

Up a slight incline - like up/over a "ramped curb"?..:@

And (the stabilizers?) - going down the same incline?..:h

As previously posted, a top-of-the line Power Caster rated a "no" to those questions on a much smaller TT. Been there done (tried) that....which is why the neighbor has it now.

The guy I bought it from had pics just like yours, moving his trailer next to his home in Bishop, CA - on a flat, concrete surface.

Is the pictured item manufactured - or a DIY?..:h

RE-check the (my) bottom line.....
"If somebody knows of one, I'll join the OP and put it to use".
Caveat: at a reasonable price, LOL!
The Power Caster PC-3 that I bought "way back when" for $300. is now $1425.

Soooooo - who makes it? -
Mfgr? - Rube or?..:@
Kinda looks like a DJ - see next

BTW - several models available from this company.
D J Products
Although they claim their movers will work on snow, grass, ice - none of their promo videos show that.

Oh yeah, and - Yikes!...$10K & $13K for 5th wheel movers!.:R

Makes a used fork lift look pretty good!..;)


.

Dtank wrote:

Looking at ALL the suggestions - AND manufactured products......
no device has been posted yet that lifts under the front of a 5th (not the pin), and moves it around *without* a tow vehicle.

.

Guess you missed this one.

bpounds wrote:

Dtank wrote:

BTW - the idea about adding a ball under the 5th is rediculous..:R

.

;)

Might be that you lack imagination. That is a better point to lift from, than a pin 4' off the ground.

A trailer ball would not be the way to do it however.

The "lifting" is *not* the problem...:R

Moving it around when lifted *IS* the problem.

*If* you have a paved surface (not grass), that's level and flat
(no curbs to "ramp up") there are several options (like Power Caster) that work well - all of which use the pin.

Soooooo if somebody knows of one, I'll join the OP and put it to use.


.

Picked this RV-50 Loadmaster up a number of years ago to manuever my 5th wheel into a very tight parking spot alongside our garage/shop. Worked OK once I put down some gravel for added traction.

Was able to then park 5th wheel in company hangar. Excellent on concrete floor. Now retired, new house, new BIGGER 5th wheel, more room to park but so much easier to place right where I want it using the RV tug. Added benefit is tucking my utility trailer alongside the 5'ver without straining my back. It has ball as well as 5th wheel capabilities.

4 years ago I tried to sell for $2500 on Craigslist. No takers. Today it's (almost) worth it's weight in gold! (To me)

Look for the RV series of Loadmasters manufactured by Fab Shop in McPherson,KS. Unfortunately they are no longer in business, but you might find one on craiglist or eBay.

You need a farm! :)

This being Minnesota, a LOT of places have a parking pad along the side of the house or driveway for a boat. I have seen several where the parking is at a right angle to the drive.
For some of the places we have looked at, the space is big enough to park a 5th. The problem would be in maneuvering both the 5th and the TV around to get into the spot. Several of my current neighbors have smaller dollies for their boats to address the issue. So something like the links provided (thank you!) might just fit the bill.
While expensive, it would be cheaper than buying more acreage with suitable access.
So in future shopping that opens up options....now I just have to find a place that accommodates both the 5th AND the boat!

bpounds wrote:

Dtank wrote:

BTW - the idea about adding a ball under the 5th is rediculous..:R

.

Might be that you lack imagination. That is a better point to lift from, than a pin 4' off the ground.

A trailer ball would not be the way to do it however.

I agree with that!

Dtank wrote:

BTW - the idea about adding a ball under the 5th is rediculous..:R

.

Might be that you lack imagination. That is a better point to lift from, than a pin 4' off the ground.

A trailer ball would not be the way to do it however.