Front landing gear tip-adjustable foot
I use an adjustable landing gear foot on the landing gear that is closest to the up-down button for the landing gear-no shimming etc. Pull pin on opposite side lower til adequate-put pin back in-lo...
Forum Discussion
because there is only one control for UP or Down on my fiver,I have installed handles on the bottom of the front jacks.
When the pins are pulled and the jack drops down,it looks like both jacks are
solid on the ground,they may both be,or not.
By lifting the jack using the handle,I can tell if one is not really all the way down,from that point I shim as needed.
It took me a couple of years to figure that out.Yeah,some of us are slow learners. :)
When the pins are pulled and the jack drops down,it looks like both jacks are
solid on the ground,they may both be,or not.
By lifting the jack using the handle,I can tell if one is not really all the way down,from that point I shim as needed.
It took me a couple of years to figure that out.Yeah,some of us are slow learners. :)
