Lower skirt/panel damaged

SH wrote:
If you are talking about the aluminum j-panel, All-Rite can make what you need. You will need to paint it!

Yup, but before the paint on aluminum you're going to need a proper prep and priming. You can go with zinc chromate after an Alumiprep wash - old school and works - or Alumiprep scrub the Alodine followed by an epoxy primer. Personally, I don't like the bargain basement prep a lot of painters do with an Alumiprep scrub (using Scotchbrite pad) and a "wash primer".

If you are talking about the aluminum j-panel, All-Rite can make what you need. You will need to paint it!

IconDirect specializes in formed ABS plastics, but they may be able to match what you have. Contact Jason.

Buddy-Gregg RV in Knoxville is a full repair RV dealer, they have a big repair shop just off campbel station rd

I've used these folks twice and they did a pretty fair job making a replacement. It was a pretty straightforward job replacing it. The old screw holes didn't line up and I just drilled new ones.

Icon Direct

Any body shop should work.. I think the panel is just sheet aluminum. If it were me, I'd go to RVsforless. Tiny little place but they've done great work for me.