StirCrazy
Jun 11, 2023Moderator
Sailun 637
just trying to find out how many people are running the sailun 637 st tires on their rigs on the factory rims. I am trying to find out what pressure people are running them at and if you have had any...
blofgren wrote:StirCrazy wrote:
Let me add to this conversation, if your rv had a GVRW for 12400ish lbs and a pin weight of 2500 would you even go to a load range G tire. I decided to kick this down the road for a few years since I have replaced two tires in the last two years (one at the beginning of last season and one last week) and found a third that I suspect had separated so I took the other two in and got them done this morning. so, rolling down the road the weight on the tires should total around 10000 lbs which a good 10 ply is rated for 3500lbs @ 80psi. 70PSI will give me 3000lbs per tire. So as of right now I have 4 new Hercules Power ST2 tires so I am going to run these for the next season or two and decide exactly what I should go with for a tire. is the Sailun overkill? for this weight. I think for 3000lbs per tire from them I would be running at 65PSI
Steve
Have you weighed your axles to ensure that they are carrying what you think they are? If so, then the Sailun may be overkill. That said, they are a good heavy duty tire with very heavy sidewalls, and with your stated weights they would last a good, long time.
I certainly wouldn't run them at 65 psi if you decide to go with them, but they would probably be fine at 80 psi. You might find that your tire shop will not mount them on 80 psi wheels, however....