Storage Door Lift Attachment Plate Repair
Need advice on repairing attachment plate for gas struts that hold storage/baggage door open. This is the plate that attaches gas strut to actual door. Screws are not holding. Have tried "match" stick...
Forum Discussion
houstonstroker wrote:I just installed a strut kit on one of my basement doors and it looks just like that. The kit had a pre-glued plate that you used an activator on the glue, then screwed the plate to the door using about 8 screws. Seems to be very solid.
I installed a cargo door strut on the front compartment of my 5th wheel. I used a two part epoxy and lots of short screws. Clamped over night. I used rivets to attach the strut bracket to the plate.
