Stress crack in fiberglass
Noticed today a 2+ inch stress crack in side of camper. Located on the lower right corner of bedroom slide. The picture shows it as the camper is supported by landing gear. When it is hooked up to tru...
Forum Discussion
make it a 1/16 inch hole and be sure it is BEYOND the end of the crack by 1/8 inch or so. The purpose of the hole is to spread the force creating the crack to such an extent that the crack will not propagate.
Fill the crack with some kind of epoxy and you won't see the hole (or it will be really difficult to see). It really works.
Fill the crack with some kind of epoxy and you won't see the hole (or it will be really difficult to see). It really works.
