Tonneau Cover

I have a Tonneau Cover trifold tow 2008 Cameo no problems.

My fold a cover has never caused me a problem. Maybe it is a trifold issue?

No problems here either. Might have something to do with the type of the cover and the size of the truck bed.

Mine comes nowhere near the bottom of the fiver. Maybe Padlin is correct and it affects short beds.

I use a quad fold no problems but note I only have 5" clearance.

I think this could be a problem if the clearance is less than six or so inches. I have been considering getting a cover, but my clearance is less than six inches and I have actually scraped the spray-on liner on the rails a little bit. Not enough to hurt anything seriously, but a little bit. There are some covers that install very close to even with the top of the rails, that might be the way to go.

I have a Pace Edwards Bedlocker and it is < 1/4" higher than the bedrails

I have plenty of clearance with my tri-fold. But I also have about 8-9" of bed to trailer clearance. BTW, 6.5' bed, non-slider hitch.

Tbiker99: It looks like you took the Pict with your 5er at a full or near full 90deg. What is your nonslider hitch?

My trifold cover gives plenty of clearance.