Forum Discussion
fulltimin
Aug 17, 2017Nomad
Back out with the welder today. I concentrated on 2 different areas in the rear of the motor home.
The first area was on the drivers side, indicated by the red circle. There was some welding that I hadn't completed on the bottom of the steel, between the flooring steel, and the wall steel.
I had welded everything on the top side, and about 1/2 of the bottom side, and I wanted to complete that, and finally did, today.
The first area was on the drivers side, indicated by the red circle. There was some welding that I hadn't completed on the bottom of the steel, between the flooring steel, and the wall steel.
I had welded everything on the top side, and about 1/2 of the bottom side, and I wanted to complete that, and finally did, today.
About Motorhome Group
38,705 PostsLatest Activity: Jan 24, 2025