Here is something I have been wanting to post for a while, and now seems like as good a time as any.
This first pic is one where I glued 4 pieces of blue board insulation together with gorilla glue. They are roughly 3 feet long and 6 inches wide, and 1.5 inches thick, so we had 6 inches thickness total. I was curious as to how much weight they would support.
They were supported on each end, and the supports were about 30 inches apart. The moment I stepped on them, boom - straight to the floor. I didn't even get all my weight on them.
This pic does not show that - forgot to take a pic, but afterwards, I glued them back together in the middle where they had broken. That you can see inside the red rectangle.
More to come in the next couple of pics and posts.
