blowing Fuse
Need some input to help out a friend who is having trouble with his class A blowing a "Bus" fuse on the side of the motor (gas) when he starts the generator. MH has been in storage through the winter,...
Forum Discussion
are you talking about a little glass control fuse
on the front of the generator control box ?
this will be internal to the control boards
while wires running to the remote switch inside can get chewed on
these wires normally use a grounding circuit signal not a hot 12v signal
to test, unplug the control wire plug going into the side of the control box, normally a straight line molex connector
and use the start button on the genset to see if it will start without blowing the fuse
on the front of the generator control box ?
this will be internal to the control boards
while wires running to the remote switch inside can get chewed on
these wires normally use a grounding circuit signal not a hot 12v signal
to test, unplug the control wire plug going into the side of the control box, normally a straight line molex connector
and use the start button on the genset to see if it will start without blowing the fuse
