BT Cruiser cabover noise fixed!
I have had an annoying graunching noise in the cab ceiling of my BT Cruiser for quite a while. Tore apart the wall adjoining the cab and tightened every screw and bolt I could find to no avail. GulfSt...
Forum Discussion
Gents:
I certainly appreciate the willingness to share experience in repair of the 213.
"RV" or "Arvey" is becoming ever more personalized as little touches make it even more pleasant.
I finished my 'overhead foam pad rack' finished, and it looks virtually factory original.
I do have digital photos I'd share, as the format for the cabinet slat brackets are adaptable to other uses than bedding.
Due to repeated miseries with such as imageshack/photowhatever/etc I refuse to use any more of the image hosting sites, I am at a loss on how to post a sample.
Currently am looking for a 2" wide, 12" long piano hinge to mount a swing up shelf. The accessory shelf we bought came with a 1.2" wide piano hinge, too narrow to use where we want. Trying to preserve the vinyl trim edging below the sink/drawer area while installing the folding shelf. The too-narrow hinge requires removing permanently a 12" section. I'm sure I can mount from below with just a mild trim on the lower edge with 2" wide hinge. Maybe I'll have to get a couple separate hinges instead of the piano hinge style.
I certainly appreciate the willingness to share experience in repair of the 213.
"RV" or "Arvey" is becoming ever more personalized as little touches make it even more pleasant.
I finished my 'overhead foam pad rack' finished, and it looks virtually factory original.
I do have digital photos I'd share, as the format for the cabinet slat brackets are adaptable to other uses than bedding.
Due to repeated miseries with such as imageshack/photowhatever/etc I refuse to use any more of the image hosting sites, I am at a loss on how to post a sample.
Currently am looking for a 2" wide, 12" long piano hinge to mount a swing up shelf. The accessory shelf we bought came with a 1.2" wide piano hinge, too narrow to use where we want. Trying to preserve the vinyl trim edging below the sink/drawer area while installing the folding shelf. The too-narrow hinge requires removing permanently a 12" section. I'm sure I can mount from below with just a mild trim on the lower edge with 2" wide hinge. Maybe I'll have to get a couple separate hinges instead of the piano hinge style.
