Changing coolant 2000, V10. Help!!!
HI, I want to change coolant in my V10. I know it should be 50/50 antifreeze/ distilled water. When I drain system, I only get 3 gal. of the eight it holds. I know that it is not possible to drai...
Forum Discussion
I would rinse it again with distilled water for starters. Get 20 gallons from the warehouse store. I would have recommended this from the start.
Then pour 4 gallons of antifreeze in while it pushes the water out. Top off with distilled or 50/50 antifreeze depending if you seem to lose any antifreeze in the process.
You can check the mix with a tester from the local autoparts store.
Then pour 4 gallons of antifreeze in while it pushes the water out. Top off with distilled or 50/50 antifreeze depending if you seem to lose any antifreeze in the process.
You can check the mix with a tester from the local autoparts store.
