bagman
Nov 05, 2016Explorer
Delamination?
So if one wanted to rehab a Class A M.H. that has much delamination and a roof that leaks, how can you replace all that material and stop it from happening again down the road. I say this because the ...
rgatijnet1 wrote:
In my opinion, you can spend a lot of time, and money, and even after it is repaired, the 1992 Monterey may still be only worth $1200.
I believe the only way that you can properly repair delamination is to completely remove the side wall, take it apart, replace all damaged wood and insulation foam, apply a better adhesive, and then put it all back together again using compression to hold the sidewall flat while the adhesive sets up.
To me this is not s DIY project and should only be attempted in a factory type environment. Even then, the time and materials involved would NOT increase the value of the coach being repaired. Of course, there is probably interior ceiling panels that also have to be dealt with as well as rotted floors from the leaks.
Stopping a roof leak is pretty simple basic repair work. Dealing with the delamination and other damage that has already taken place is the huge problem.
I would find another project Class A without delamination issues.
TNGW1500SE wrote:
My 2003 Sunova 30B has de-lam on both lower sides. This winter (if I have time) I'm going to cut the bottom 2 feet of fiberglass off and remove the rotted wood. Then I'm going to spray foam insulation on it and cut that flat. After that's done, I'm going to cover the lower sides with diamond plate glued and riveted to the aluminum sidewall structure then paint to match. I'm also resealing EVERYTHING including all windows.
I think it's worth the effort. I've only got 20K miles on it and we looked at a new one. They wanted 90K for anything we'd be interested in and we'd have to upgrade the new one after purchase to get what we have now. Doing the work myself, I estimate costs at around a grand but even if I put a couple of thousand in this repair, I'll still come out way ahead. Diamond plate can be purchased on-line in 4x8 sheets.
The dealer offered 11K in trade. That was an insult. I know I could get 25K or better easily for it on Craigslist. They just wanted to steal it. I don't go back in there anymore. If they had offered a fair price we may have traded. Dealers suck!
NOTE: Above plan may change without notice. LOL