Fixing water damage on the old Dodge (pics)

The only experience I have is rebuilding the overhead portion of my old camper 2 years ago. This thing is built quite similar. Using 1x2 and 1x3's stapled together to form a framework then sandwiching that frame between two layers of paneling. The outer layer of paneling sees most of the water followed by the 1x's. Here's most of todays progress (if you can call it that). As far as tools go, I'm using a cordless drill with a 1/4 inch socket to remove all the rusty screws and a nice phillips bit. Other than that, just some standard stuff like side cutters, pliers, screwdrivers, and a wonderbar to pop the staples out of the siding.

I started out with the left rear and worked my way forward and up.









I got a little further today, but it was too dark for decent pics. ;)