Full on REMODEL inside & out

No, you are not going to be able to side your RV with home siding. The way siding is designed to be installed on a home would cause the siding to separate and fly off when driving 60 MPH (even worse if there is any wind). This is not the option you are looking for. Ensuring the seams are all sealed and painting the coach (even with a brush and roller or air gun) is going to give you a more satisfactory result.

Bruce Brown wrote:
Not a motorhome but a travel trailer. It's a lot of work but was also a lot of fun. I have around 400 hours in this one, 395 of them were a blast.

If you decide to do it, take lots of pictures before taking things apart.

Camper Rehab

Bruce what a job. Is this a hobby for you or a full time job? That was a lot of work but came out very nice.

daved9664 wrote:
Weight is not an issue, I removed the generator, old water heater, old furnace, and old propane tank and will not be replacing. I also took out the microwave (bad for you anyway), TV (same), and heavy metal stairs. I dropped a huge amount of weight. It can take siding and new walls. I want siding to sell it for more as a tiny home.

Anybody have some resources on redoing the wood walls on the inside??? Pictures, guides, anything. Less speculation, more positivity and links! Cheers.

How will you be using it as a home if you can't cook, stay warm or bathe in it? Seems like you could have bought a tiny house and saved a lot of hassle and money and have needed amenities to actually call it a house. Don't want to come across as negative but you took out the living essentials so you could add siding. Sorry, I don't get it.

daved9664 wrote:
Weight is not an issue, I removed the generator, old water heater, old furnace, and old propane tank and will not be replacing. I also took out the microwave (bad for you anyway), TV (same), and heavy metal stairs. I dropped a huge amount of weight. It can take siding and new walls. I want siding to sell it for more as a tiny home.

Anybody have some resources on redoing the wood walls on the inside??? Pictures, guides, anything. Less speculation, more positivity and links! Cheers.

Anybody have some resources on redoing the wood walls on the inside??? Pictures, guides, anything. Less speculation, more positivity and links! Cheers.

Look in the thread in my signature line, "the Cowboy/Hilton". There are lots of pictures and reasoning discussed.

#1 Tip: Draw plans. They don't have to be CAD, just something you can reference and write on to get the schedule of events and layout right. Or, remove a newly installed wall to put that switch box in (the one you forgot, lol).

Weight is not an issue, I removed the generator, old water heater, old furnace, and old propane tank and will not be replacing. I also took out the microwave (bad for you anyway), TV (same), and heavy metal stairs. I dropped a huge amount of weight. It can take siding and new walls. I want siding to sell it for more as a tiny home.

Anybody have some resources on redoing the wood walls on the inside??? Pictures, guides, anything. Less speculation, more positivity and links! Cheers.

Not a motorhome but a travel trailer. It's a lot of work but was also a lot of fun. I have around 400 hours in this one, 395 of them were a blast.

If you decide to do it, take lots of pictures before taking things apart.

Camper Rehab

If this is a serious post, I'm not so sure anyone can tell you how to remodel inside and out. Inside is doable with some serious experience at remodeling and preferably experience at remodeling an RV. House siding on an RV isn't going to work if you plan on keeping it mobile. If you have a metal skin on the outside, you could remove all of it and buy replacement skin,,,, maybe.

RV walls and siding are permanently attached
You will be adding lots of additional weight, that may overload the axles or frame
Springs or airlifts will raise the body keep it from sagging, but does not strengthen the chassis or axles, excess weight is a killer
Also you will have to seal every attaching hole made or water will get into the walls and weaken them

I would think very hard before doing this
If you really want this look
Shop for a house truck, built from the frame with house style framing and look

Look up "house trucks" on Google
Most are one off custom builds by the people that use them
Occasionally one comes up for sale
Many are works of art by master craftsman, absolutely beautiful

Pictures, I want to see picture if ya do it. Time and patience and anything can be done. Throwing money at the problem never seems to hurt either.

I would do a repaint or a WRAP before siding.
Less likely to failure in extreme situations and when on the road.
After a few years in the sun any repairs to siding may be really noticeable due to fading. When on the road finding a matching piece will be a big PIA. With paint if you have the "numbers" the paint can be matched.
What will you attach the siding to? Most sandwich type walls will not hold the siding.