Onan oil filter threads damaged
Onan 7000. Performing the season-end oil change yesterday, the oil filter was really hard to get off, had to use a breaker-bar on the oil-filter socket to break the filter loose. That's a really bad o...
Forum Discussion
mike brez wrote:Sully2 wrote:rgatijnet1 wrote:
When installing any spin on oil filter, always coat the gasket surface with wheel bearing grease, NOT oil. Oil will tend to harden from the heat and make the filter difficult to remove. Wheel bearing grease can handle the heat and will allow for easy removal when the time comes.
Horse Manure. The gasket or the gasket surface can be rubbed with EITHER a high temp grease or motoroil
ROTFLMAO Sully I gotta have a beer with you some day.
You can use grease or oil but only if they are synthetic. :B:W
I just had to say that.
Bill
