Oh, and one more point: You cannot pull fuel from the generator pickup once the tank is at 1/4. Note the shorter pipe on the left side of the pump/sender assembly:
![](https://a4.pbase.com/g2/88/791988/2/148393397.i8zTJJLk.jpg)
And a side comment: to those folks who argue about keeping a full tank in winter to keep the tank from rusting, I learned two things when I undertook this project:
1) The tank and associated bits are all stainless - there's nothing to rust.
2) A full tank is about 4ish inches below the top of the tank due to the design of the fill tube. The tank must have head space for expansion.