The 2014 looks a little easier than my 2011 but essentially it can be cut with a sawz-all. I found a cutoff wheel easier but it took some time. I think you also will need some cobalt bits to drill through the frame and a good drill. Putting a base plate on a CRV is no easy task. Sure Blue OX says it can be done in 3 hours - if you do it every day. It took me 8 and most shops would agree they estimate about 8 hours of labor. I did it myself, but if I ever have to again I will pay a shop. It's a lot of hassle. Also if you have to move the power steering cooling line ( I did on my 2011) be careful. I nicked the line and had to replace it. Left my CRV sitting for 2 days waiting on the part.
