sewer hose

Get a macerator system.

Do not mean to sound condescending, but you need fittings on the end of the hose to connect to the trailer.

Fit through what? Are you trying to hook the sewer hose up to the waste outlet or are you trying to fit the hose into the bumper for storage?

hose is a twist on lock fit over the nubs on the side of the waste outlet

sounds like you are missing the fiting on the end of the hose

or somebody broke the end off of the outlet

this is a picture of a 45 degree adapter that has clear insert so you can see when your tank is flushed clean

but what i want you to see is what each end looks like

the claws on the left should be on your hose
the nubs on the fight side should be on your dump fitting
your hose or his adapter locks on to the dump fitting
the claws lock on to the nubs
if your dump fitting does not have these nubs, you need a new fitting attached
if your hose does not have the claws you need a new hose

Blueline sewer hose

I use all Blueline sewer hose. Tried the Rhino stuff but the ends were too big to fit in my sewer hose storing area.

I also have a Vista. The Thetford Titan Premium Hose fits easily through the hole and as a bonus, it's easy to grip.

timpitt wrote:
We have a 2019 winnebago vista VE 29ft. I'm looking for sewer hose that fits thru the opening. The ends of my camco hose don't fit thru the opening from the waste outlet. I,m try find one that would work.

Are you trying the right hole. No RV should have a sewer hose connection hole that will not connect to a standard 3" sewer hose.

Our coach has a hole thru the bottom of the water bay. After you feed the hose up thru that hole (or down thru depending on where you start) there is a bib that fits there. You then connect the hose to the outlet. That is probably the hole he is talking about.

Our hose doesn't fit though the hole in the wetbay either. It is a pain, but we remove the end each time to feed the hose through to make do.