sewer hose

Finally Time wrote:
If you had a Winnebago with the idiotic small hole for the sewer hose you would understand the problem. The bottom of the wet bay has a hole with a rotating cover plate, that the sewer hose, after attaching one end to the waste drain outlet, goes through to exit the wet bay and then to the sewer dump inlet. The hole molded into the bottom of the wet bay is too small for the typical fittings attached to the end of the sewer hose to pass through.

Most of us Winnebago people have tried various methods of working around this. Some take the fitting off to pass the hose through the hole, then reattach it, but that gets old pretty fast. I used my Dremil to enlarge the hole, but still RhinoFlex connectors would not pass through it. For a while I just didn't use the hole let the hose dangle out the open wet bay door. I found the Thetford Titan on sale and its fittings will pass through the hole. Problem solved for me, but you would think after years of this Winnebago would change the design.