turn signals not working
1999 Fleetwood bounder Ford V10 Turn signals and hazard signals not working fuse are fine an so it the relay. I read the lever switch could be bad. Anyone know the part number to the switch ? Lo...
Forum Discussion
Hello, * problem fixed *
flashing the lights worked, wipers work so I don't think it was the switch.
Tilting the wheel didn't change anything but i made me look a the wiring at
the steering wheel shaft. There is a relay at the bottom against the firewall.
number#F6tD-13350-AA wiggled it and hazards and signals worked again.
the placement of it pinches the wires, so I'm just going to relocated it.
Yey, every time I drove her i was afraid of being pull over besides it not being safe when trying to change lanes.
Thanks guys!!!
flashing the lights worked, wipers work so I don't think it was the switch.
Tilting the wheel didn't change anything but i made me look a the wiring at
the steering wheel shaft. There is a relay at the bottom against the firewall.
number#F6tD-13350-AA wiggled it and hazards and signals worked again.
the placement of it pinches the wires, so I'm just going to relocated it.
Yey, every time I drove her i was afraid of being pull over besides it not being safe when trying to change lanes.
Thanks guys!!!
