Upgrading TV and associated AV equipment
Just finished pulling the front TV and associated stock AV equipment out of our 2008 Beaver Contessa which is very similar to other Monaco products of 2008 vintage. I left the in dash cheesy stereo an...
Forum Discussion
aksnowman wrote:
Can you post a photo of the latches? It is the one area I am still figuring out.
So i started with one latch and used for support. Ended up using two latches one at top and bottom (right side).Didn't work. Put a roller that was on TV side with a bracket for the roller to go up on and support all the right side weight. Then latches just held TV back in place. No weight. Ended up running a little rope to the top latch. Started with chain but made to much noise bouncing around. I sold That RV years ago.
