HDMI outlet.. Ideas??

how ' bout tnis:

HDMI and USB 3.0 Wall Plate HDMI Wall Charger Outlet Mount Socket Face Plate Panel Cover,W... https://www.amazon.com/dp/B075DVN6DD/ref=cm_sw_r_sms_tai_4fXWDb...

or this...

https://www.parts-express.com/audtek-electronics-hdmicb-chassis-mount-hdmi-14-feed-thru-jack-d-style-nickel--181-339?gclid=Cj0KCQiA-4nuBRCnARIsAHwyuPo-t3nMeRO1bZ6L9voSbj6wlghA_x_CSHu0QXAYD52BwBWgvF2esFUaAt5_EALw_wcB

do a google search for 'panel mount hdmi'.

That or if it's a newer TV, have you considered wireless?

Most HDMI outlets are just an outlet or a single port for mounting on a plate. What you can do is just make your own connection junction with whatever you like in it (HDMI, coax, USB etc.) and use a standard RV weatherproof cover and plate.

Here's a picture of what one could look like; just imagine a standard cover like over your ac outlet.



Note: this is a premade stock outlet from CDW, there are many more with different configurations.

I am looking for something that would be in a covered plate to protect it from road water / elements..

valhalla360 wrote:
That or if it's a newer TV, have you considered wireless?

not that new of TV

DD716TED wrote:
I am looking for something that would be in a covered plate to protect it from road water / elements..

oh, ok. like this?
https://images.app.goo.gl/kKXPmsxuTME5nGwN7

just google 'Weatherproof HDMI Panel Connector'

Not sure of the nature of what you are trying to hook up, but they do make converter boxes for Component to Coax (they exist for HDMI also, but I think it's pricier). You could plug your RCA output into a converter box and then plug that into the coax line that runs to your outside ports.

The resulting signal wouldn't be as good as running HDMI the whole way, but it would save a fair amount of wiring and rigging.

HDMI over coax converters are also available.

Hdmi over coax and use your existing outside coax with a coax to the receiver module then hdmi to the tv .. there is a transmitter you connect to the hdmi out on the sat box then the coax to the outside. You’ll need a hdmi splitter if you want to watch the inside tv also 100 bucks up for the both the transmitter & receiver and another 30-50 for the hdmi splitter.
The cheap way , and this is how I currently send my wally to the bedroom tv is with a component ( the yellow white red out ) to coax adapter commonly called a game adapter. It sends the signal std definition to the rear the on coax on Channel 3 or 4. Turn the tv on to Channel 3 and change Channel’s with the sat tuner. The picture isn’t high def but it’s passable. All in 12 bucks.

DD716TED wrote:
I am looking for something that would be in a covered plate to protect it from road water / elements..

That was an example of the various configurations of standard communications/media plates. Any standard exterior RV electrical outlet cover sold in every RV, boat, home improvement or online will cover the plate and make it weather tight.