TV Mount - Moving from inside to outside

mfoster711 wrote:
I think I found the answer.

http://www.jensenrvdirect.com/products/lcd-tvs/lcd-tv-mounts.html You have to buy two of the wall mount back plates and then whichever tv mount works for your tv.

Not the exact thing the Roo had but works just like it.

Same ones I linked you to in an earlier post. Jensen get's top dollar. Find the model you want and then Google the part number (like MAF30) and you can get the same thing in an RCA brand for 1/3 less.
Jensen clones

I think I found the answer.

http://www.jensenrvdirect.com/products/lcd-tvs/lcd-tv-mounts.html You have to buy two of the wall mount back plates and then whichever tv mount works for your tv.

Not the exact thing the Roo had but works just like it.

Open Range has the same feature only it is designed to move the bedroom TV outside. Neat feature however in the end it was more convenient to just buy a dedicated TV for the outside vs. moving TV around.

The TV Mount on the Roo was a full swivel mount that allowed the TV to be adjusted to any angle. Also, the swivel arm detached at the wall and you carry the TV and swivel arm outside and slide it in. This allows you to easily adjust the viewing angle when mounted in either location. That was a really big plus to their design.

This is what I have. It works great.

Bruce

Ours came with the PAW International version and it is mounted in the same way in the bedroom. Very nice feature. Of course, we need to stop camping where it is raining and then I will get to use this feature... ;)

wmoses wrote:

Tom_M wrote:
Here are a couple of similar hang on wall types that would work:
....

:h

Tom - how do you figure that would work for the OP (or me since I have the same mount outside my RV). The slotted holes on the existing mount will accept two same-size male "heads" whereas the mounts you show require a different "male" mating piece that would be on the TV, i.e. two different systems.

The way I read the OP's initial post, he wants the ones he saw. In my case I am considering getting extras of that type so that I can move the bedroom TV to the outside if I wanted.

Sure there are several "slide-out" mounting systems, and the FR one is one of them. The question is - where to get them.

I'm assuming that the OP presently has no brackets and is looking for a solution.

PAW International sells there stuff in eBay:
PAW International

The OmniMount can be found on Amazon:
OmniMount. Looks like you can't buy just the wall mount though.

OP - I like the picture. ;) Seems familiar ...

Tom_M wrote:
Here are a couple of similar hang on wall types that would work:
....

:h

Tom - how do you figure that would work for the OP (or me since I have the same mount outside my RV). The slotted holes on the existing mount will accept two same-size male "heads" whereas the mounts you show require a different "male" mating piece that would be on the TV, i.e. two different systems.

The way I read the OP's initial post, he wants the ones he saw. In my case I am considering getting extras of that type so that I can move the bedroom TV to the outside if I wanted.

Sure there are several "slide-out" mounting systems, and the FR one is one of them. The question is - where to get them.

Mine are mounted with a Jensen MAF30 mount and uses these "back plates" that you can mount in several locations.
back plates