cancel
Showing results forย 
Search instead forย 
Did you mean:ย 

Overdrive on or off?

Fla904
Explorer
Explorer
I have a class C gas ford v-10 motor home. I noticed today it drives much smoother, accelerates faster, and switches gears smoother with overdrive off. The whole time I've owned it overdrive was on. Which is better to use highway driving and which is better on the engine in terms of engine wear?
14 REPLIES 14

RBPerry
Explorer
Explorer
Generally automatic transmissions are programmed to shift based on load and RPM, the engineers that develop these shift points know what there doing, what they don't know it the environment your engine is running in. One thing I do know for a fact is if a transmission is shifting constantly it is building heat, and wear and that is not a good thing. For me I want my transmission to keep my engine close to it's peak torque curve, that is going to put the least amount of strain on the engine and produce close to the best fuel mileage.
A standard transmission normally doesn't care how many times it is shifted as long as the driver isn't banging gears. Some drivers do have a tendency to lug an engine that is backed by a standard trans.

Grit_dog
Navigator
Navigator
frankdamp wrote:
If you had a car with a 5-speed stick shift, would you never use 5th speed? What you're doing is the same, IMO.

Absolutely, if you couldn't pull 5th gear or kept downshifting around every corner.
However, that's the main advantage of a manual trans, being able to pull high gear longer without damaging the transmission.
With a stick you can pull any gear you want until the engine won't pull it (not talking about lugging a diesel and egts here) and you'll do no transmission damage. With an auto trans pretty much regardless of design, if you're not able to keep the converter locked and/or downshifting a bunch you're making unnecessary trans killing heat.
2016 Ram 2500, MotorOps.ca EFIlive tuned, 5โ€ turbo back, 6" lift on 37s
2017 Heartland Torque T29 - Sold.
Couple of Arctic Fox TCs - Sold

frankdamp
Explorer
Explorer
If you had a car with a 5-speed stick shift, would you never use 5th speed? What you're doing is the same, IMO.
Frank Damp, DW - Eileen, pet - female Labrador (10 yrs old), location Anacortes, WA, retired RVers (since Dec 2014)

RBPerry
Explorer
Explorer
I'm a retired truck mechanic, most over the road trucks have a transmission temp gauge. Reason being heat is one of the things that kills automatic transmissions. If the transmission is shifting frequently then it is being overworked and will heat up. The heat breaks down the fluid and that in turn causes excessive wear. Changing the AFT fluid every 30k miles will prolong the transmission life considerably. My personal belief is if you can run in OD and hold that gear you should be fine, I do know there are two schools of thought on this issue and I have technicians argue it back and forth.

time2roll
Nomad
Nomad

Grit_dog
Navigator
Navigator
Simple. Leave OD on if the trans is holding that gear. Turn it off if keeps downshifting or even unlocking the torque converter.
In hilly terrain, just lock it out. Triton engines like to rev and your transmission and brakes will thank you for it.
2016 Ram 2500, MotorOps.ca EFIlive tuned, 5โ€ turbo back, 6" lift on 37s
2017 Heartland Torque T29 - Sold.
Couple of Arctic Fox TCs - Sold

dodge_guy
Explorer II
Explorer II
Also you can have the PCM reprogrammed to provide optimal towing/loaded shift strategy. I did just that with my V-10 Excursion and it dramatically changed how the truck performed with my 9200lb TT.

Check out 5star tuning, they have a very good reputation with the triton motors and towing. With them it's not all about power but the overall performance for what you want it to do!
Wife Kim
Son Brandon 17yrs
Daughter Marissa 16yrs
Dog Bailey

12 Forest River Georgetown 350TS Hellwig sway bars, BlueOx TrueCenter stabilizer

13 Ford Explorer Roadmaster Stowmaster 5000, VIP Tow>
A bad day camping is
better than a good day at work!

Deleted_per_op
Explorer
Explorer
wa8yxm wrote:
Dick_B wrote:
I would be in overdrive unless it starts to downshift frequently. What is frequently? Make it 15 minutes or less.


The manuals say things like "not in hilly country", "not if towing" and "Not in bad weather" as a general rule.

But the advice is the best advice.. If it is constantly "Hunting" for the right gear (Shifting frequently) turn it off. but if it's shifting into Overdrive and staying there for miles and miles and miles and miles (how far CSI-Cyber adn the WHO can see) Well... (yes that is a joke), Well then engage it. and leave it engaged, Makes a major difference in MPG on my Class A.


Here's a ham radio guy showing his age! He remembers the band "The Who" singing "I can see for miles and miles.....". I think I read about that in history class. (or maybe not) :B
Dave

wa8yxm
Explorer III
Explorer III
Dick_B wrote:
I would be in overdrive unless it starts to downshift frequently. What is frequently? Make it 15 minutes or less.


The manuals say things like "not in hilly country", "not if towing" and "Not in bad weather" as a general rule.

But the advice is the best advice.. If it is constantly "Hunting" for the right gear (Shifting frequently) turn it off. but if it's shifting into Overdrive and staying there for miles and miles and miles and miles (how far CSI-Cyber adn the WHO can see) Well... (yes that is a joke), Well then engage it. and leave it engaged, Makes a major difference in MPG on my Class A.
Home was where I park it. but alas the.
2005 Damon Intruder 377 Alas declared a total loss
after a semi "nicked" it. Still have the radios
Kenwood TS-2000, ICOM ID-5100, ID-51A+2, ID-880 REF030C most times

dodge_guy
Explorer II
Explorer II
I checked the OP`s sig, thy have a 98 E350 chassis. so with that I would leave O/D on and only lock it out if it shifts in and out of O/D frequently.
Wife Kim
Son Brandon 17yrs
Daughter Marissa 16yrs
Dog Bailey

12 Forest River Georgetown 350TS Hellwig sway bars, BlueOx TrueCenter stabilizer

13 Ford Explorer Roadmaster Stowmaster 5000, VIP Tow>
A bad day camping is
better than a good day at work!

bukhrn
Explorer III
Explorer III
My answer was going to be, "depends", but it looks like it's been answered pretty well.
2007 Forester 2941DS
2014 Ford Focus
Zamboni, Long Haired Mini Dachshund

DrewE
Explorer II
Explorer II
Is your button labeled "O/D Off" or "Tow/Haul"?

If you have an "O/D Off" button, it's an older chassis with the four speed transmission and the button simply locks out the fourth (overdrive) gear. This can be useful when driving through areas of rolling hills, etc. You can also make it kick out of overdrive by pushing the accelerator down far enough to make it downshift.

If it's labeled "Tow/Haul," you have a newer five or six speed transmission, and the button does not disable overdrive. It instead alters the shift logic some to optimize it for heavier loads--tending to stay in lower gears longer, downshift for engine braking, and avoiding unlocking the torque converter so as to keep the transmission temperatures cooler, perhaps among other things. Since a class C motorhome is a large load for the chassis, it's perfectly reasonable to leave tow/haul engaged all the time. It's especially helpful in hilly or mountainous areas.

old_guy
Explorer
Explorer
a mechanic told me if it has over drive factory installed it is OK to use it when on the open road. that's why it is there. like the above post states, if the tranny is searching for gears, it is time to turn it off and down shift. when the road is level or going down a hill, turn it back on.

Dick_B
Explorer
Explorer
I would be in overdrive unless it starts to downshift frequently. What is frequently? Make it 15 minutes or less.
Dick_B
2003 SunnyBrook 27FKS
2011 3/4 T Chevrolet Suburban
Equal-i-zer Hitch
One wife, two electric bikes (both Currie Tech Path+ models)